Please read these instructions before preparing a manuscript for the International Journal of Food Systems and Innovations. Submissions that do not follow them may be returned without review.
IJFSI is a Diamond Open Access journal. There are no article processing charges, submission fees or publication fees. All manuscripts undergo double-blind peer review.
1. Types of manuscripts
- Original Research Articles: complete reports of original research with novel, reproducible findings. Indicative length up to 8,000 words.
- Review Articles: critical and comprehensive syntheses of a field, including systematic reviews and meta-analyses. Indicative length up to 10,000 words.
- Short Communications: concise reports of significant findings that merit rapid dissemination. Indicative length up to 3,000 words.
- Technical Notes: descriptions of technical developments, equipment, software or procedures. Indicative length up to 3,000 words.
- Methodological Papers: new or substantially improved analytical, experimental or computational methods, with validation.
- Editorials: written by the editors or by invitation.
- Special Issue Contributions: manuscripts submitted in response to the call for an approved special issue.
Word counts exclude the abstract, references, tables and figure captions and are indicative. Invited categories, including editorials and invited reviews or perspectives, may require prior editorial approval; authors who wish to propose such a contribution should write to the editorial office before submission.
2. Before you submit
- The manuscript must be original, must not have been published elsewhere and must not be under consideration by another journal.
- All authors must have approved the manuscript and agreed to its submission. Authorship must reflect genuine contributions.
- The work must comply with the Publication Ethics, Plagiarism Policy, Conflict of Interest Policy and AI Policy of the journal.
- Manuscripts must be written in clear English. Authors may wish to have the text checked by a proficient colleague before submission.
3. Files to prepare
Because the journal operates double-blind peer review, author information must be kept separate from the manuscript.
- Title page (separate file): manuscript title, short running title, full names of all authors, institutional affiliations, country, email addresses, ORCID iDs where available, corresponding author details, author contributions, funding, conflict of interest statement and acknowledgements.
- Anonymised manuscript (main file): title, abstract, keywords, main text, data availability statement, references, tables and figures, with no information that identifies the authors. Refer to your own earlier work in the third person and remove identifying details from file properties.
- Cover letter.
- Figures as separate files, if not embedded at sufficient quality.
- Supplementary materials, if applicable.
- Declarations: Author Declaration, Conflict of Interest Declaration and Author Contribution Statement.
Templates for all of these are available under Author Resources.
4. Manuscript structure
Original research articles
- Title
- Author names (title page only)
- Institutional affiliations (title page only)
- Corresponding author information (title page only)
- Abstract: a single paragraph of up to 250 words stating the purpose, methods, main results and conclusions, without citations
- Keywords: four to six, separated by semicolons
- Introduction
- Materials and Methods
- Results
- Discussion
- Conclusion
- Author Contributions (title page only)
- Funding Statement (title page only)
- Conflict of Interest Statement (title page only)
- Acknowledgements (title page only)
- Data Availability Statement
- References
- Supplementary Materials, if applicable
Results and Discussion may be combined where this improves clarity.
Review articles
- Title, abstract and keywords
- Introduction, stating the scope and objectives of the review
- Methodology of the review: sources searched, period covered, and inclusion and exclusion criteria
- Thematic sections that critically analyse the literature
- Research gaps, challenges and future perspectives
- Conclusion
- Declarations and references
Short communications and technical notes
These follow the structure of a research article in condensed form, with a short abstract of up to 150 words and a limited number of figures and tables.
5. Formatting requirements
These are the initial IJFSI formatting requirements. They may be updated by the editorial office.
- Language: English, with consistent British or American spelling
- File format: Microsoft Word (.docx)
- Page size: A4, with margins of 2.5 cm
- Font: Times New Roman or an equivalent readable font
- Main text: 12 pt
- Line spacing: 1.5
- Number the pages consecutively; continuous line numbering is encouraged
- Use SI units
- Number tables and figures sequentially in the order in which they are cited
- Use consistent scientific nomenclature; give scientific names of organisms in italics and in full at first mention
- Define abbreviations at first occurrence
- Number equations consecutively and identify suppliers of specialised equipment and reagents
6. References
IJFSI uses an author–date reference style based on APA (6th edition), with the IJFSI modifications listed below. An EndNote output style that applies these rules automatically, and the complete reference guidelines with examples for every type of source, can be downloaded at the end of this section.
- Every in-text citation must appear in the reference list.
- Every entry in the reference list must be cited in the text.
- Give the DOI of every source that has one.
- Check that journal titles, volume, issue and page numbers are accurate.
- Do not cite sources you have not read, and never include fabricated or unverifiable references. References suggested by AI tools must be checked against the original source.
Reference style at a glance
- Authors: list all authors, surname first followed by initials. Use “and” (not “&”) before the last author. Do not use “et al.” in the reference list.
- Year: in parentheses after the authors, for example (2018). Use (in press) for accepted articles that are not yet published.
- Titles: article, chapter and book titles in sentence case. Journal names in full, not abbreviated.
- Font style: plain text only, with no italics, bold or underlining.
- Volume, issue and pages: 109, 107–121 or 2(1), 15–28.
- DOI: at the end of the reference, in the form doi:10.xxxx/xxxxx, with no full stop after it.
- ISBN: for books, book chapters and conference proceedings, placed before the DOI, for example ISBN: 978-1-23-456789-7.
- Layout of the reference list: Times New Roman, 10 pt, single line spacing, hanging indent of 0.8 cm, no numbering or bullets, ordered alphabetically by the surname of the first author.
Citing in the text
Cite as (Author, Year), (Author and Author, Year) or (Author et al., Year), for example (Dhalsamant et al., 2018). Use “et al.” for three or more authors from the first citation. Separate several sources with semicolons, and distinguish works by the same authors in the same year as 2023a, 2023b.
Formats
- Journal article: Author, A. A., Author, B. B., and Author, C. C. (Year). Title of the article. Title of the Journal, volume(issue), first page–last page. doi:10.xxxx/xxxxx
- Example: Dhalsamant, K., Tripathy, P. P., and Shrivastava, S. L. (2018). Heat transfer analysis during mixed-mode solar drying of potato cylinders incorporating shrinkage: Numerical simulation and experimental validation. Food and Bioproducts Processing, 109, 107–121. doi:10.1016/j.fbp.2018.03.005
- Article in press: Author, A. A., and Author, B. B. (in press). Title of the article. Title of the Journal. doi:10.xxxx/xxxxx
- Book: Author, A. A. (Year). Title of the book (2nd ed.). City, Country: Publisher. ISBN: 978-x-xxx-xxxxx-x. doi:10.xxxx/xxxxx
- Edited book: Editor, A. A., and Editor, B. B. (Eds.). (Year). Title of the book (2nd ed.). City, Country: Publisher. ISBN: 978-x-xxx-xxxxx-x. doi:10.xxxx/xxxxx
- Book chapter: Author, A. A. (Year). Title of the chapter. In E. E. Editor and F. F. Editor (Eds.), Title of the book (2nd ed., Vol. 1, pp. first page–last page). City, Country: Publisher. ISBN: 978-x-xxx-xxxxx-x. doi:10.xxxx/xxxxx
- Thesis: Author, A. A. (Year). Title of the thesis. (Doctoral dissertation). University, City, Country.
- Conference paper: Author, A. A. (Year). Title of the paper. Paper presented at the Name of the Conference, City, Country. doi:10.xxxx/xxxxx
- Report: Organisation or Author. (Year). Title of the report (Report No. xxx). Retrieved from URL
- Patent: Inventor, A. A. (Year). Title of the patent. Country Patent No. xxxxxx. City: Issuing office.
- Standard: Organisation. (Year). Standard number: Title of the standard. City, Country: Publisher.
- Website: Organisation or Author. (Year, Month Day). Title of the page. Site name. Retrieved from URL
EndNote style and full reference guidelines
The IJFSI EndNote style (EndNote X7 and later) formats citations and references automatically. Unzip the download, double-click IJFSI.ens and choose File > Save As in EndNote, then select IJFSI as the style in Word. Under EndNote > Configure Bibliography > Layout, set Times New Roman, size 10, hanging indent 0.8 cm, single line spacing and no space after. Authors who do not use EndNote should format references by hand, following the reference guidelines.
- IJFSI EndNote StyleOutput style IJFSI.ens for EndNote X7 and later, with installation notes and the reference guidelines.ZIP (.zip)
- Reference GuidelinesRules, in-text citations and examples for every type of reference.PDF (.pdf)
7. Figures and tables
- Formats: TIFF, PNG or JPEG for images; PDF or EPS for line art; editable tables in Word, not as images.
- Resolution: at least 300 dpi for photographs and 600 dpi for line art at the intended size.
- Figure captions: placed below each figure, concise and understandable without the main text, with all symbols and abbreviations explained.
- Table titles: placed above each table; explanatory notes go in footnotes below the table.
- Permissions: authors must obtain written permission to reproduce figures, tables or images from other sources and must acknowledge the source.
- Data presentation: report means with a measure of variation and the number of replicates; do not present the same data in both a table and a figure.
- Statistical significance: name the statistical tests and software used, state the significance level, and indicate significant differences clearly, for example with letters or exact p values.
- Images must not be manipulated in a way that changes their scientific meaning.
8. Supplementary materials
Authors may submit material that supports the article but is not essential to the main text.
- Additional datasets
- Supplementary tables
- Supplementary figures
- Video files
- Detailed analytical methods
- Supporting documents such as questionnaires or code
Label supplementary files clearly (Table S1, Figure S1 and so on), cite them in the manuscript and anonymise them for review. Supplementary materials are peer reviewed with the manuscript and published as supplied.
9. Research ethics and declarations
The following declarations are required where relevant.
- Human participants: approval by an appropriate ethics committee and informed consent, including for sensory evaluation and consumer studies.
- Animal experiments: approval by an institutional animal ethics committee and compliance with applicable guidelines.
- Research permissions: permits for field work, collection of biological material or use of protected data, where required.
- Funding: all sources of financial support, with grant numbers, or a statement that no specific funding was received.
- Conflicts of interest: any financial, professional or personal interests that could influence the work, or a statement that there are none.
- Author contributions: the contribution of each author.
- Data availability: where the data supporting the findings can be accessed, or the reasons for any restriction.
- Plagiarism and originality: confirmation that the work is original and properly cited. Manuscripts are screened for similarity.
- AI-assisted writing and analysis: disclosure of any material use of generative AI or AI-assisted tools. AI tools cannot be listed as authors.
10. Manuscript preparation checklist
- Original and unpublished manuscript
- Complete author details
- Anonymous manuscript file for double-blind review
- Separate title page
- Abstract and keywords
- Correct figures and tables
- Reference accuracy
- Ethics statements
- Conflict-of-interest declaration
- Funding declaration
- Copyright and licence requirements read and understood
- Supplementary materials, where applicable
- Manuscript Preparation ChecklistItems to verify before submission.Word (.docx)
11. Cover letter
Each submission must be accompanied by a cover letter addressed to the Editor-in-Chief that states the title and type of the manuscript, summarises its significance and fit with the scope of the journal, and confirms originality, the approval of all authors and compliance with the ethical requirements.
- Cover Letter TemplateSample cover letter addressed to the Editor-in-Chief.Word (.docx)
12. Declaration forms and templates
The following editable templates can be downloaded as Word documents.
- Manuscript TemplateStructured template for the anonymised main manuscript file.Word (.docx)
- Title Page TemplateSeparate title page with author details, required for double-blind review.Word (.docx)
- Author DeclarationDeclaration of originality, authorship and ethical compliance, signed by all authors.Word (.docx)
- Conflict of Interest DeclarationDisclosure of financial, professional and personal interests.Word (.docx)
- Author Contribution StatementContribution of each author, by role.Word (.docx)
- Copyright and Licence AgreementDraft agreement, subject to formal approval of the licensing terms by the publisher.Word (.docx)
13. After submission
Manuscripts are screened by the editorial office and then sent for double-blind peer review as described in the Peer Review Policy. Authors of accepted manuscripts receive proofs for checking before publication. Copyright and licensing are described in Copyright and Licensing.